Ohlins SUPERBIKE FG 570 User Manual download pdf (Page 4)

Adjusters

Your Öhlins super bike front fork is pro-

vided with the following external adjusters:

• Spring pre-load adjuster

• Rebound damping adjuster.

• Two type of compression

damping adjuster:

- Reservoir valve adjuster in the

lower part of the fork leg.

- Main valve bleed circuit.

NOTE!

The rebound damping adjuster is located at

the top of the right hand fork leg. The Main

valve bleed circuit (compression adjuster) is

located at the top of the left hand fork leg.

Spring pre-load adjustment

Use a 17-mm wrench to turn the upper

adjustment screw. The adjustment range

is 0-18mm. On the adjustment screw one

turn will change 1mm in spring pre-load.

Recommended static sag is 25-30 mm.

Compression adjustment main valve.

Adjust the compression damping on the

adjustment screw positioned at the top of

the left hand fork leg. Use a hex key with

spherical head (use tool 794-01).

Adjustment range from closed valve

(clockwise) to maximum open valve

(counter clockwise) is 20 “clicks”. Recom-

mended adjustment “click”, from closed

position: See specification card.

Rebound adjustment

Adjust the rebound damping on the adjust-

ment screw positioned at the top centre of

the right hand fork leg. Use a hex key with

a spherical head (use tool 794-01).

Adjustment range from closed valve (clock-

wise) until maximum open valve (counter

clockwise) is 20 “clicks”. Recommended

adjustment “click”, from closed position:

See specification card.

Compression adjustment reservoir valve

(Base valve)

Adjust the compression damping (shaft

displacement) on the lower part of the fork

legs. Use a normal screwdriver. Adjustment

range from closed valve (clockwise) to

maximum open valve (counter clockwise)

is 20 “clicks”. Recommended adjustment

“clicks”, from closed position:

See specification card.

Top cap

Increase spring pre-load

Reduce spring pre-load

17 mm wrench

Spring pre-load adjustment

Compression adjustment

Left Hand Fork Leg

Tool 794-01

Clockwise turn

closes = increase

compression

damping

Counter clockwise

turn opens = reduce

compression damping

Rebound adjustment

Right Hand Fork Leg

Tool 794-01

Clockwise turn

closes = increase

rebound damping

Counter clockwise

turn opens = reduce

rebound damping

Compression adjusment reservoir valve (Base valve))

Clockwise turn closes =

increase compression damping

Counter clockwise turn opens =

reduce compression damping

Screwdriver

4

1 2 3 4 5 6 7 8 9 ... 27 28

Comments to this Manuals

No comments